Detailed features Lamp power: 16 W UV-C, low pressure (Low-Pressure Mercury Vapor). UV wave: 254 nm , effective against bacteria and microorganisms. Recommended flow rate for complete sterility: up to 7.6 L/min (≈2 GPM). Lamp life: approximately 9,000 hours of operation. Materials: The housing is made of high-quality material for maximum UV light transfer — typically stainless steel or a similar durable material. Protective features: The UV sterilizer does not add chemicals to the water and does not create secondary pollutants. Recommendations for use Before the UV chamber, it is recommended to undergo filtration - removal of solid particles (for example, with a 5 µm or finer pre-filter) to improve the efficiency of the UV radiation. Replace the lamp every ~9,000 hours of operation, even if it is still on, because efficiency decreases over time. Clean the inside of the quartz tube (sleeve) to remove any buildup of calcium or mineral deposits that may block UV light. Set up the system so that the UV lamp has sufficient contact with the water – it is recommended that the inlet-outlet be below or above the chamber, as indicated in the instructions. Make sure that no air or bubbles remain in the chamber — they reduce the effectiveness of sterilization. Benefits It offers powerful disinfection without chemicals , at a low energy cost. Capable of handling up to ~7.6 L/min — suitable for both small home and medium-sized systems. The lamp with a life of ~9000 hours guarantees long use before needing replacement. Minimal maintenance — only periodic cleaning and lamp replacement.
